Race and Rally
Go Kart Harness

Race and Rally
PROFESSIONAL SERIES COMPETITION HARNESS
Complies with FIA 8853/98

RFR Cam Lock System:

• Autoliv Aftermarket's new competition harnesses use the patented RFR (Regressive Force Release) Cam Lock System. After the initial release operation, release forces become less (regressive) instead of greater (progressive).
• Lightest weight cam lock available at 179 grams (6.3 ounces).
• The material used for the buckle housing is Polycarbonate. It has high shock resistance and easily withstands temperatures from +120ºC down to -52ºC.
  Tested and operational to over 150,000 opening cycles.
• The RFR Cam Lock has been tested for load conditions exceeding 18kN (3970lb).
• Belt tongues are ejected from the buckle at full rotation of opening lever.
• Competition style cam lock offers ergonomic design and is in compliance with FIA/98 and the FISA regulations (without a protruding lever to avoid the chance of unintentional release).
• All materials meet the applicable automotive flammability and toxicity requirements.
• The carbon fibre "tilt member" gear assembly is enclosed, therefore protected against dust, dirt, liquids, etc.
• Springs are designed for durability and will not lose their pre-load, as is often the case with cam locks using blade springs.

76mm (3") Webbing:

• Autoliv Aftermarket uses Polyester Webbing for its harness restraints. Polyester has a much better energy conversion capability than common polyamide (Nylon) webbing especially designed to minimise the forces during the rebound phase of the accident. It does not have the "rubber band" effect associated with other webbing.
• Polyester has the best resistance against UV-rays and chemicals, such as solvents and acids.
• The webbing pattern prevents the straps from tangling. It also provides optimum load spreading during crash conditions due to its "memory effect", a device which keeps the webbing flat.

76mm (3") Adjusters:

• Autoliv Aftermarket uses 76mm (3") length adjusters which are approx. 70 grams (2.5 ounces) lighter than other common adjusters on the market. The required adjusting forces are also reduced by this design. Combined with lightweight RFR buckle, Autoliv Aftermarket harnesses can be up to 350 grams (12.5 ounces) lighter than other brands.

V8 Supercar star John Bowe with the new
Autoliv Aftermarket Safety Harness.

COMPETITION RACE HARNESS
Complies with Australian/New Zealand Standard AS/NZS 2596 - 1999

Buckle and Tongue:

• Autoliv Aftermarket's new Competition Harnesses use the proven K12 Buckle and Tongue as found in all Original Equipment vehicle applications.
• Buckle and Tongue provide smooth, positive and easy engagement and release.
• The material used for the Buckle and Tongue can withstand temperatures from -300 to +1000 C.
• Tested and operational over 50-,000 opening cycles.
• The K12 Buckle has been tested for load conditions exceeding 18kN (3,970 lb)

Applications:

• Controlled motor racing events
• On road use where original belts are static not retractable type.

50mm (2") Webbing:

• Autoliv Aftermarket uses Polyester Webbing for its harness restraints specially designed to minimise the forces during the rebound phase of the accident.
• Webbing is four panel high strength 27kN (5,950 lb) plus.
• Polyester has the best resistance against UV rays and chemicals.

50mm (2") Adjusters:

• Autoliv Aftermarket uses 50mm (2") length adjusters that are compact yet strong and easy to adjust and are lighter than other common adjusters on the market.
  Anchors:
• Both fixed and quick release Anchors are available to best suit your application.

Sports Appearance:

• Autoliv Aftermarket Harnesses come in ten (10) webbing colours.

Autoliv Aftermarket have designed a harness specifically for use in Go-karts. The harness is easily adjusted, comfortable and durable.

This four point harness features 2” wide black webbing, vibration and shock resistant adjusters, quick release buckle and bolt in end fittings.